Electric Undamped Stops

The robust, low-cost basic stop option.

These are best suited to applications where one or more multiple pallets must be placed in a defined position.

Inductive and electronic proximity switches can be used to specifically identify the upper and lower positions for the stop to ensure high productivity with short cycle times.

DEL0 65 stop


Lowering Stroke: 9mm

Max. Propelling Force: 65N

65kg Pallet Weight (at 6m/min)

Data Sheet Call us for a quote
DEL0 120 stop


Lowering Stroke: 14mm

Max. Propelling Force: 206N

300kg Pallet Weight (at 6m/min)

Data Sheet Call us for a quote
ELU 30 stop


Lowering Stroke: 7mm

Max. Propelling Force: 20N

20kg Pallet Weight (at 6m/min)

Data Sheet Call us for a quote
ELU 20 stop


Lowering Stroke: 7mm

Max. Propelling Force: 30N

30kg Pallet Weight (at 6m/min)

Data Sheet Call us for a quote
DELW stop

Rotary Switch DELW

The rotary switch is used, in combination with a mechanical arm, to direct pallets into one of several tracks.

The rotary movement is fast, with high torque. The two positions that limit the rotary movement can be individually programmed.


  • 2×5 pin M12x1 plug
  • customer-specific solutions
  • various accessories
Data Sheet Call us for a quote


Total control of palletised loads in automated processes

WörneR Stops are modular, compact, adaptable stopping and separating devices for automated material handling. Damped and undamped versions are used where pallet loads must be precisely stopped or separated or their direction controlled.

Suitable for both belt and roller conveyors they can be simply fitted and adapted for either local or central control. Where damped, the effect adjusts automatically to compensate for varying loads. Easily retro-fitted to existing systems

  • Optimum damping regardless of actual load level
  • Short cycle times due to higher point to point speeds
  • Shock elimination protects delicate assemblies and sub-assemblies
  • Adapts to varying speeds simplify automated handling
  • Noise & shock reduction a welcome side effect in any assembly environment

WörneR damped stops use atmospheric air for damping and compressed air or electrics for indexing. They provide precise and shock free stopping and separation for pallet loads on all types of conveyor systems. Designed to protect palletised loads and the structure of the conveyor, from the repeated shock and vibration produced by dead stops. From 0.25kg up to 1500 kg force. Speeds up to 36 m/min.

Wörner undamped stops are applied to simple systems or where intermediate holding of work pieces is necessary on slow moving systems.

Latest News

  • Basic design and function of an ADE actuator

Electrical Cylinder Actuators

April 24th, 2019|Comments Off on Electrical Cylinder Actuators

Our last article looked at the benefits of linear chain for specific linear motion needs – but we know that for many situations, linear actuators remain a popular choice and are suited to a wide [...]

  • Grob's linear chain lift lower and push pull

Linear motion alternatives

April 16th, 2019|Comments Off on Linear motion alternatives

There have been many articles written discussing the pros and cons of various linear motion alternatives, and for many years the choices have been limited to hydraulic, pneumatic and electric cylinder actuation; in fact, if [...]

  • R+W Coupling catalogue offers extra info through augmented reality

What is a coupling and do you need one?

April 9th, 2019|Comments Off on What is a coupling and do you need one?

What is a coupling? A coupling is a component which joins two shafts and transfers torque from a driven shaft (driving force) to a driven shaft component. An example of this is a propeller – [...]

  • Hand tightened bolt showing torque vs tension

What are Torque and Tension?

March 25th, 2019|Comments Off on What are Torque and Tension?

Torque = T Force = F Torque = force from turning or twisting Tension = power from a straight pull (this differs from torque) So Torque is used to create Tension Why is Torque necessary? [...]