U section rail and combined bearing welded to a flange plate
Axial adjustable bearing exploded view
Combined Bearing welded to a flange plate
I Section Rail
U section Rail
winkel bearing SKF Winkel
Our Combined Bearings provide a cost-effective guide solution to lift systems, platforms and cantilever loads. The system combines a radial bearing to take out high moment loads and a smaller axial roller to eliminate side movement.
Features and Benefits:
- Welded bearing and plate assembly for quick replacement
- Load capacity up to 40kN per bearing
- Industry standard sizes for ease of interchange
- 2D and 3D models available to download
Wide range of hardened steel roller bearings with axial side rollers.
Lubricated and sealed with re-lubrication holes on larger sizes.
Combined Bearings & Flange Plates
Welded plate and bearing assembly using chemi black coated steel flange plates available with through and tapped holes for a choice of mounting.
I & U Section Rails
Hot rolled German steel sections in U and I configurations. Lengths up to 12 metres on request.
Corrosion Resistance Coatings
In difficult or corrosive applications Drive Lines can provide Armoloy® TDC coating for the bearings and hot dip galvanising for the rails, creating cost effective corrosion resistance.
|Part No.||Diameter (mm)||System Max
Load per Bearing